Motovated Case Studies

Boyd MARK II/III Rock Crusher


Shaft analysis was performed for Rocklabs of Auckland in conjunction with Mechanix Design.  Stresses were developed from deflections derived with strain gauge instrumentation by Optimech Services of Onehunga.

Screen Shot 2016-04-26 at 2.37.16 PMScreen Shot 2016-04-26 at 2.37.22 PM

Eccentric Shaft in Bending

Related Posts

Motovated Skellerup 3500 Litre Tank Case Study Motovated Skellerup 3500 Litre Tank Case StudyBackground Skellerup Rotomould approached Motovated Design and Analysis Ltd to aid in the des...
P11 Bogie Design & Analysis for KiwiRail P11 Bogie Design & Analysis for KiwiRailBackground Late in 2009 KiwiRail commissioned Motovated to engineer a bogie in support of their n...
Motovated SCS Ripper Gearbox Design Case Study SCS Ripper Gearbox Design Case StudyBackground Screening and Crushing Systems (SCS) approached Motovated Design & Analysis to help in t...
Motovated Klima Cane Prunner case study Motovated KLIMA CANE PRUNER Case StudyBackground Motovated Design & Analysis has worked with Honeypot Holdings over the past 3 years to...
Motovated Slurry Wall Case Study Motovated Slurry Wall for Amsterdam Subway Station Case StudyBackgroundIn 1997 De Weger Architecten and Ingenieursbureau in The Netherlands requested ...