Motovated Case Studies

Engine Design


 

We would like to tell you about these designs, but then we would have to kill you!

Seriously, a number of our clients have asked that we not reveal their parts, even in isometric views.

Attached, however is a motor we are allowed to show, courtesy of Shuttleworth Axial Motor Company.

engine_design

Related Posts

Motovated Slurry Wall Case Study Motovated Slurry Wall for Amsterdam Subway Station Case StudyBackgroundIn 1997 De Weger Architecten and Ingenieursbureau in The Netherlands requested ...
Motovated Steelbro Sidelifter Case Study Motovated Steelbro Sidelifter Case StudyBackground Steelbro NZ Ltd produces innovative container handling equipment for the container trans...
Motovated Klima Cane Prunner case study Motovated KLIMA CANE PRUNER Case StudyBackground Motovated Design & Analysis has worked with Honeypot Holdings over the past 3 years to...
Motovated Skellerup 3500 Litre Tank Case Study Motovated Skellerup 3500 Litre Tank Case StudyBackground Skellerup Rotomould approached Motovated Design and Analysis Ltd to aid in the des...
P11 Bogie Design & Analysis for KiwiRail P11 Bogie Design & Analysis for KiwiRailBackground Late in 2009 KiwiRail commissioned Motovated to engineer a bogie in support of their n...