Engineering Case Studies


ETCO2 Design by Motovated

ETCO2 Case StudyNew 

Anaesthetists rely on End Tidal carbon dioxide (ETCO2) readings displayed on anaesthetic monitors to indicate a patient’s breathing patterns. This ...
Read More
Spinal Traction Unit Case Study

Spinal Traction Unit Case StudyNew 

The Spinal Traction Unit realigns a dislocated cervical spine, reducing the compression on the spinal cord and providing the best ...
Read More
Antarctica NZ Traverse Living Module Case Study

Antarctica NZ Traverse Living Module Case StudyNew 

Antarctica New Zealand (AntNZ), in conjunction with The Composite Group,engaged Motovated to develop a living module for Antarctica. The concept ...
Read More
P11 Bogie Design & Analysis for KiwiRail

P11 Bogie Design & Analysis for KiwiRail

Late in 2009 KiwiRail commissioned Motovated to engineer a bogie in support of their new Tranz Scenic rail cars. These ...
Read More
KLIMA machine design by Motovated Design & Analysis

Klima Cane Pruner- Gen II Case StudyNew 

Motovated has worked with George Manufacturing for more than 11 years to develop many variations of their KLIMA Cane Pruner ...
Read More
Container Tipper/Bulk Loader Case Study

Container Tipper/Bulk Loader Case Study

NZExpress approached Motovated Design & Analysis was approached to help in the development of an innovative idea for loading grain ...
Read More
YachtBot – Waterproof Data Aquisition Case Study

YachtBot – Waterproof Data Aquisition Case Study

Igtimi engaged Motovated Design & Analysis (MD&A) to supply the mechanical design and project management for the YachtBot, a completely ...
Read More
Bus Designs for DesignLine Case Study

Bus Designs for DesignLine Case Study

Motovated were able to reverse engineer existing buses, using legacy 2D CAD data to generate complete 3D models of entire ...
Read More
Steelbro Sidelifter Case Study

Steelbro Sidelifter Case Study

Steelbro approached Motovated with the challenge to create a new sidelifter design that would expand their catalogue by offering a ...
Read More
Nimrod 20T Quick Hitch

Nimrod 20T Quick Hitch

Nimrod Engineering Ltd approached Motovated to design a new 20T quick hitch to reduce the time and cost of fabrication ...
Read More
EcoCentral Glass Pulverising Plant Case Study

EcoCentral Glass Pulverising Plant Case Study

EcoCentral commissioned Motovated Design & Analysis to redevelop their glass pulverising plant that was a key component of the company's ...
Read More
SCS Ripper Gearbox Design Case Study

SCS Ripper Gearbox Design Case Study

Screening and Crushing Systems (SCS) approached Motovated Design & Analysis to help in the expansion and development of their Vertical ...
Read More
Nimrod 6-8T Tilt Hitch

Nimrod 6-8T Tilt Hitch

The development of a 6-8 tonne tilt hitch scaled from a 12 tonne model was experiencing problems and Motovated were ...
Read More
SATCO - Forestry Equipment

SATCO – Forestry Equipment

Forestry Equipment SATCO is the brand name of forestry equipment produced by Forest Systems of Tokoroa. Owners Warwick and Rodney ...
Read More
Four Seasons Molasses Lick

Four Seasons Molasses Lick

Cattle feed company 4 Seasons Molasses approached Skellerup Rotomould to develop and manufacture their concept for a new molasses lick ...
Read More
Seafury SF18 Surface Piercing Drive Unit

Seafury SF18 Surface Piercing Drive Unit

Seafury International Ltd produces a range of surface piercing drives and propellers for the marine industry, and have been involved ...
Read More
Skellerup 3500 Litre Tank

Skellerup 3500 Litre Tank

Skellerup Rotomould approached Motovated Design and Analysis Ltd to aid in the design of a multipurpose 3500-litre water/septic tank ...
Read More