EventsLatest news

Let’s get back to the basics of machine design. Design the 4 bar linkage that will make move the dumpster through the three required positions, as shown in the figure below.

Please send us your sketch showing the linkage and pins position.  The first in correct answer (or at least the one that matches our answer…) will be forever immortalised in our next newsletter.  See if you can beat your friends!  Email your answer to competition@motovated.co.nz

 

Related Posts

FEA: Static and Dynamic Analysis of Mechanical Par... FEA: Static and Dynamic Analysis of Mechanical Parts The Static and Dynamic analysis of mechanical parts plays a very important role for the efficien...
Tales from the Shed – FAB LAB CHCHNew  Need a 3D Printer or some Laser Cutting to finish a project?Get FAB LAB CHCH, Fabriko or a MakerCrate to help!​Do you have a project you’re keen on fi...
Motovated’s Newsletter – November 2018 Message from Greg It’s been a busy month! Leon presented on “How to reduce failures by a factor of 10” at NZMEC and I presented “Lessons learned from...
Canterbury TechSummit 2018- It’s a wrap! Canterbury TechSummit 2018 - It’s a wrap! This year's Canterbury TechSummit was an exciting event for the team here at Motovated. The technology solu...
Leon presenting at National Maintenance Engineerin... Leon Presenting on Fatigue Cracking at NMEC 2018 Happy Tuesday folks!  Our GM, Leon Daly, will be presenting at this year's National Maintenance Engi...